Page 4 of 5
I.
Carefully place the table top (#4)
facing down on a protected
surface.
II.
Insert two wood dowels (#C) into
the pre-drilled holes of the table
top (#4).
III. Align the assembled cross legs
(#1 & #2) with the two wood
dowels (#C) and the pre-drilled
holes on the table top (#4).
IV. Insert 4 screws (#A) through the
pre-drilled holes of the cross legs
(#1 & #2) using the Phillips
screwdriver to lock them with the
table top (#4).
#A x 2 pcs
#B x 4 pcs
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
I.
Align the inner cross leg (#1)
with the pre-drilled holes on
the outer cross leg (#2).
II.
Insert 2 screws (#A) through
the pre-drilled holes of the
outer cross leg (#2) using the
Phillips screwdriver to lock
them with the inner cross leg
(#1).
III. Apply the 4 stickers (#B) to
cover the bolt holes.
#A x 4 pcs
#C x 2 pcs
Summary of Contents for CM4641E
Page 2: ...Page 2 of 5 ...
