Page 4 of 4
I.
With the help of another person,
carefully place the table top (#1)
facing down on a protective
surface.
II.
Align the 4 legs (#2) with the pre-
drilled holes on the bottom of the
table top (#1).
III. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#D) onto the bolt (#B) and then
the flat washer (#C) onto the
SAME bolt (#B), in that order.
IV. Insert the bolt assemblies through
the pre-drilled holes of the table
top (#1) and secure those bolts
using the Allen wrench (#A) to lock
them with the legs (#2).
#B x 4 pcs
#C x 4 pcs
#D x 4 pcs
I.
Align the table base (#3) with the pre-
drilled holes on the legs (#2).
II.
Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#D) onto the bolt
(#B) and then the flat washer (#C) onto the
SAME bolt (#B), in that order.
III. Insert the bolt assemblies through the pre-
drilled holes of the table base (#3) and
secure those bolts using the Allen wrench
(#A) to lock them with the legs (#2).
IV. Carefully place the table in its upright
position. Make sure the table is rested on
a flat surface and it does not feel loose or
wobbly. If it does, double check that the
bolts are secured and properly tighten.
Turn right (clockwise) to tighten
#B x 4 pcs
#C x 4 pcs
#D x 4 pcs
Turn right (clockwise) to tighten
#2
#C
#D
#C
#D
#2
ASSEMBLY IS COMPLETED
Summary of Contents for CM4636S
Page 2: ...Page 2 of 4...
