Page 5 of 5
I.
Align the assembled leg
stands (#1) with the pre-
drilled holes on the table
frame (#4).
II.
Prepare 4 bolt assemblies
by inserting the flat washer
(#D) onto the bolt (#B).
III.
Insert the bolt assemblies
through the assembled leg
stands (#1) and secure
those bolts using the Allen
wrench (#F) to lock them
with the table frame (#4).
I.
With the help of another person,
carefully place the table top (#5)
facing down on a protected
surface. Align the brackets of the
assembled table frame (#4) with
the pre-drilled holes on the table
top (#5).
II.
Insert 6 flat-head bolts (#A)
through the brackets of the
assembled table frame (#4) and
secure those bolts (#A) using the
Allen wrench (#F) to lock them
with the table top (#5).
III.
Carefully place the table in the
upright position. Make sure the
table is rested on a flat surface
and does not feel loose or
wobbly. If it does, double check
that the bolts/screws are secured
and properly tightened.
IV.
If necessary, adjust the levelers
(#E) according to the ground
level. To lower or to raise the
levelers (#E), turn the levelers
clockwise or counterclockwise,
respectively.
#B x 4 pcs
#D x 4 pcs
#A x 6 pcs
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
Summary of Contents for CM4230C
Page 2: ...Page 2 of 5...
