Page 4 of 5
#A x 8 pcs
#B x 8 pcs
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
I.
Align the 2 short leg stands (#2)
with the brackets of the 2 long
leg stands (#1). Make sure the
screw holes for the levelers (#C)
on the 2 long leg stands (#1) are
facing upward.
II.
Prepare 8 bolt assemblies by
inserting the lock washer (#B)
onto the bolt (#A).
III. Insert the bolt assemblies
through the short leg stands (#2)
and secure those bolts using the
Allen wrench (#E) to lock them
with the long leg stands (#1).
#C x 4 pcs
Align the threaded ends of the 4 levelers (#2) with the pre-
drilled holes on the corners of the long leg stands (#1) and
tighten by hand until secured.
Adjust the levelers according to
the ground level on Step 4.
Summary of Contents for CM4229S
Page 2: ...Page 2 of 5 ...
