I.
Insert the front leg support
(#5) between the 2 front
legs (#3). Then insert the 2
side leg supports (#4) into
the backrest with legs (#1)
and the 2 front legs (#3).
II.
Align the 2 front legs (#3)
with the pre-drilled holes of
the seat (#2).
III. Prepare 4 bolt assemblies
by inserting FIRST the
lock washer (#D) onto the
bolt (#C) and then the flat
washer (#E) onto the
SAME bolt (#C), in that
order.
IV. Insert the bolt assemblies
through the pre-drilled
holes on the seat (#2) and
secure those bolts using
the Allen wrench (#F) to
lock them with the 2 front
legs (#3).
Page 5 of 5
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR.
Turn right (clockwise) to tighten
I.
Secure the front leg support
(#5) and the 2 side leg
supports (#4) with 6 screws
(#H) using a Phillips
screwdriver to lock them with
the backrest with legs (#1)
and the 2 front legs (#3).
II.
Carefully turn the completed
chair upright. Make sure the
chair is rested on a flat
surface and does not feel
loose or wobbly. If it does,
double check that the
bolts/screws are secured and
properly tightened.
#H x 6 pcs
#C x 4 pcs
#D x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
#4
#5
#3
Summary of Contents for CM3823PC-2PK
Page 2: ...Page 2 of 5 ...
