Step 3
I.
Insert the front leg (#3) to align with the pre-drilled holes of the seat
cushion frame (#2).
II.
Prepare 2 bolt assemblies by inserting FIRST the lock washer (#B)
onto the bolt (#D) and then the flat washer (#A) onto the SAME bolt
(#D), in that order.
III.
Insert the 2 bolt assemblies through the two pre-drilled center holes
in the corner of the seat cushion frame (#2) and secure those bolts
using the Allen wrench (#A) to lock it in with the front leg (#3).
Repeat for the other side.
IV. Carefully turn the completed chair upright. Make sure the chair is
rested on a flat surface and it does not feel loose or wobbly. If it
does, double check that the bolts are secured and properly tighten.
Turn right (clockwise) to tighten
Page 5 of 5
#A x 4 pcs
#B x 4 pcs
#D x 4 pcs
Enlarged
ASSEMBLE EVERYTHING EXACTLY
THE SAME FOR THE SECOND CHAIR
#2
ASSEMBLY IS COMPLETED
Summary of Contents for CM3776SC-2PK
Page 2: ...Page 2 of 5 ...
