Page 4 of 5
Turn right (clockwise) to tighten
#A x 4 pcs
#B x 4 pcs
#C x 4 pcs
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
Align the 2 table bases (#5) with
the pre-drilled holes on the
pedestal (#3).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assemblies through
the 2 table bases (#5) and secure
those bolts using the Allen wrench
(#D) to lock them with the pedestal
(#3).
I.
With the help of another person, carefully
place the table top (#1) facing down on a
protected surface.
II.
Align the assembled table bases (#5) with
the pre-drilled holes on the bottom of the
table top (#1)
III.
Prepare 8 bolt assemblies by inserting
FIRST the lock washer (#B) onto the bolt
(#A) and then the flat washer (#C) onto
the SAME bolt (#A), in that order.
IV.
Insert 4 bolt assemblies through the pre-
drilled holes of the 2 table bases (#5) and
secure those bolts using the Allen wrench
(#D) to lock them with the table top (#1).
V.
Align the pedestal base (#4) with the pre-
drilled holes on the bottom of the pedestal
(#3)
VI.
Insert 4 bolt assemblies through the pre-
drilled holes of the pedestal base (#4) and
secure those bolts using the Allen wrench
(#D) to lock them with the pedestal (#3).
Turn right (clockwise) to tighten
#5
