Furniture of America CM3615T-48, Assembly Instructions

Page: 4 / 4

Page 4 of 4
I. With the help of another
person, carefully place the
table top (#2) facing down on
a protected surface.
II. Align the assembled leg
stands (#1) with the table
top (#2)(no pre-drilled holes).
III. Secure 6 screws (#B) through
the leg stands (#1) and 4
screws (#B) through the
aprons (#3) using a Phillips
screwdriver to secure them
with the table top (#2).
IV. Carefully place the completed
table upright. Make sure the
table is rested on a flat surface
and does not feel loose or
wobbly. If it does, double
check that the bolts/screws
are secured and properly
tightened.
#A x 16 pcs
I. Align the 2 aprons (#3) with the
brackets of the leg stand (#1).
II. For each bracket of the leg
stand (#1), insert 2 bolts (#A)
through the bottom of the
bracket and 2 bolts (#A)
through the back of the bracket
using the Allen wrench (#C) to
secure them with the apron
(#3).
III. Repeat the process above to
assemble the other leg stand
(#1) onto the other ends of the
2 aprons (#3).
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
Turn right (clockwise) to tighten
#B x 10 pcs
Insert each end of the aprons (#3)
onto the leg stands (#1), then insert
the bolts (#A) into each hole. Secure
using the Allen wrench (#C).
1. Carefully place the table top (#2)
face down onto a protected surface.
2. Align the top of the leg stands (#1)
and aprons (#3) to the table top.
3. Use a power tool to secure screws
(#B). If using a screwdriver: use a
light hammer to tap on the screw,
then secure using the screwdriver.
Note: No pre-drilled holes created.
ASSEMBLY IS COMPLETED