I.
Align the two front legs (#3) with
the pre-drilled holes on the bottom
of the seat (#2).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#E) onto the bolt (#B) and then
the flat washer (#D) onto the
SAME bolt (#B), in that order.
III.
Insert the bolt assemblies through
the pre-drilled holes in the corners
of the seat (#2) and secure those
bolts using the Allen wrench (#F) to
lock them with the two front legs
(#3).
IV.
Insert the front leg support (#4)
between the two front legs (#4).
V.
Insert the two side leg supports
(#5) between the front legs (#4)
and the backrest with legs.
Page 6 of 6
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
Turn right (clockwise) to tighten
I.
Secure the leg supports from Step 3 with 6 screws (#G) using a Phillips
screwdriver to lock them with the backrest with legs (#1) AND the two front
legs (#4).
II.
Carefully turn the completed chair upright. Make sure the chair is rested on
a flat surface and it does not feel loose or wobbly. If it does, double check
that the bolts/screws are secured and properly tighten.
#G x 6 pcs
Turn right (clockwise) to tighten
#2
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
#1
Summary of Contents for CM3552WC-PC-2PK
Page 3: ...Page 3 of 6 ...
