Step 1
I.
With the help of another person, carefully place the table top (#1)
facing down on a protected surface.
II.
Align the leg (#2) with the bottom corner of the table top (#1) as shown
below.
III.
Prepare two bolt assemblies by inserting FIRST the lock washer (#B)
onto the bolt (#C) and then the flat washer (#A) onto the SAME bolt
(#C), in that order.
IV.
Insert the bolt assemblies through the two pre-drilled holes on the
bottom corner of the table top (#1) and secure those bolts using the
Allen wrench (#D) to lock it in with the leg (#2).
V.
Repeat the process for the remaining 3 legs (#2).
Step 2
Turn right (clockwise) to tighten
Page 4 of 5
Enlarged
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
With the help of another person, carefully turn the
completed table upright. Make sure the table is
rested on a flat surface and it does not feel loose or
wobbly. If it does, double check that the bolts are
secured and properly tighten.
Summary of Contents for CM3318PT
Page 2: ...Page 2 of 5 ...