I.
With the help of another person, carefully place the table top
(#1) facing down on a protected surface.
II.
Align the 4 legs (#3) with the pre-drilled holes on the bottom
corners of the table top (#1).
III.
Insert FIRST the flat washer (#C) onto the threaded stud of the
legs (#3) and then the lock washer (#B) onto the SAME stud, in
that order. Secure the hex nut (#A) onto the same stud using the
wrench (#D) to tighten the parts together.
IV.
Carefully turn the completed table upright. Make sure the table
is rested on a flat surface and does not feel loose or wobbly. If it
does, double check that the bolts are secured and properly
tightened.
Turn right (clockwise) to tighten
Page 4 of 5
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
Summary of Contents for CM3187T
Page 2: ...Page 2 of 5...
