I. Align the front legs (#3) to the pre-drilled holes located in the front of the seat cushion (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#B) then the
flat washer (#E) onto that same bolt (#B). Insert into the front corner holes of the seat cushion
and secure using the wrench (#F).
I. Align the arms (#4) to the pre-drilled holes on the chair back (#1) and seat cushion (#2).
II. Prepare 4 bolt assemblies by FIRST inserting the lock washer (#D) onto the bolt (#C) then the flat washer (#E)
onto that same bolt (#C). Insert into the inner holes of the seat cushion and secure using the wrench (#F).
III. Insert 2 screws (#G) into the chair back (#1). Secure using the Phillips screwdriver.
ASSEMBLY IS COMPLETED
