Prepare 6 bolts assembly by inserting lock washer
(#F), then flat washer (#E) to bolts (#B). Align
table top base (#3) to the holes of the leg stand,
then secure with bolts (#B). Make sure to pull the
electrical connectors through the hole of the table
top base (#3) as shown in the diagram.
Prepare 8 bolts assembly by inserting lock washer (#F), then flat washer (#E) onto bolts (#B). Align table top
base (#3) to the holes of the table top (#1). Make sure the electrical connectors from the table base is near the
battery pack. Secure base with bolts (#B).
Battery Pack
