Page 4 of 6
I.
Align the 2 front legs (#4)
with the pre-drilled holes on
the corners of the sofa seat
(#1).
II.
Insert 12 screws (#A)
through the 2 front legs (#4)
and secure those screws
using the Phillip screwdriver
to tighten.
III.
Align the threaded end of
the 2 rear legs (#5) with the
pre-drilled holes on the
corners of the sofa seat (#1)
and tighten by hand until
secured and aligned with the
holes.
IV.
Secure 8 screws (#A) into
the 2 rear legs (#5) using a
Phillips screwdriver to
tighten.
With the help of another person, carefully place the sofa seat (#1)
facing down on a protective surface. Remove the 2 front legs (#4)
and the 2 rear legs (#5) located inside the sofa seat (#1).
#A x 20 pcs
Turn right (clockwise) to tighten
Summary of Contents for CM2706
Page 2: ...Page 2 of 6 ...
