Page 5 of 6
I.
Align the seat plate with handle
(#4) with the pre-drilled holes on
the bottom of the seat (#5).
II.
Insert 4 screws (#A) through the
holes of the seat plate with handle
(#4) and secure those screws
using the Allen wrench (#E) to
lock them with the seat (#5).
III.
Align the backrest (#6) with the
pre-drilled holes on the bottom of
the seat (#5).
IV.
Insert 4 screws (#B) through the
bottom of the backrest (#6) using
the Allen wrench (#E) to lock them
with the seat (#5).
Insert the 5 casters (#1) into the 5-star base
(#2). Then insert the gas lift cylinder (#3) into
the 5-star base (#2).
Turn right (clockwise) to tighten
#A x 4 pcs
#B x 4 pcs
Summary of Contents for CM-FC609
Page 3: ...Page 3 of 6 ...