Page 4 of 4
Carefully, place the ottoman in the upright position. Make
sure the ottoman is rested on a flat surface and does not feel
loose or wobbly. If it does, double check that the screws are
secured and properly tighten.
I.
Carefully place the ottoman (#1)
facing down on a protective
surface.
II.
Align the 4 feet (#2) with the pre-
drilled holes on the bottom
corners of the ottoman (#1).
III.
Insert 2 screws (#A) through the
pre-drilled holes of each foot
(#2) and secure those screws
using a Phillip screwdriver to
lock them with the ottoman.
#A x 8 pcs
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
Summary of Contents for CM-BN6007
Page 2: ...Page 2 of 4 ...
