ASSEMBLY
INSTRUCTIONS
1
2
10 / 17
Part
#1 x 1pc
Hardware
#A x 8pcs
Hardware
#C x 8pcs
Hardware
#A x 8pcs
Part
#2 x 1pc
Part
#3 x 1pc
Part
#5 x 1pc
Part
#4 x 1pc
Part
#6 x 1pc
Part
#6 x 1pc
Part
#7 x 1pc
Part
#8 x 2pcs
Part
#9 x 2pcs
Hardware
#B x 6pcs
Hardware
#C x 8pcs
Hardware
#I x 6pcs
#C
#K
#A
#1
#6
#5
#2
#K
#B
#I
#C
#8
#9
#6
#7
#3
#4
#C
#K
#A
#A
Align side rails (#5,6) to the end guardrails (#1,2), then
secure by using bolts (#A) onto barrel nuts (#C).
2. Insert a wood dowel (#I)
intoeach end of the guard
rails(#9/8). Insert the other
endof the dowels into the
holesalong the upper end guard
rails(#3/4), then insert a screw
(#B)into each end and secure
usingthe Allen wrench (#K).
1. Align the ends of the rail (#6)
andrail (#7) to the upper end
guardrails (#3,4). Insert the barrel
nuts(#C) into the rails, use a
screwdriverto align the hole for the
bolt. Insertthe bolts (#A) into the
pre-drilledholes along the outer
sides of (#3,4)and into the barrel
nut (#C). Secureusing the Allen
wrench (#K). Makesure to hold the
barrel nut with ascrewdriver while
securing the bolt.
Do not fully tighten bolts/screws
until they are all installed.
