Do not fully tighten all bolts until steps 9.
Prepare 4 bolts assembly by inserting
washer (#C) onto bolts (#A). Align
upper back rails (#4) and upper front
rail (#3) to the holes of the right panel
(#2). Secure with bolts (#A).
1) Prepare 2 bolts assembly by
inserting washer (#C) onto bolts (#A).
Align middle front rail (#5) to the
hole of the bottom front rail (#7), then
secure with bolts (#A).
2) Align middle back rails (#6) to
the hole of the bottom back rail
(#8), then secure with bolts (#A).
Summary of Contents for CM-AC521
Page 2: ......
Page 3: ......
Page 4: ......
Page 10: ...Create your own hole and screw iron connector G to the wall with screws F ...
