Furniture of America CM-AC105, Assembly Instructions Manual, Page: 5 / 6

Turn right (clockwise) to tighten
Page 5 of 6
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I. Carefully place the table top (#1)
facing down on a protected
surface.
II. Align the 4 legs (#2) with the pre-
drilled holes on the bottom corners
of the table top (#1).
III. Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#C) onto the bolt (#A) and then
the flat washer (#B) onto the
SAME bolt (#A), in that order.
IV. Insert the bolt assemblies through
the table top (#1) and secure
those bolts using the Allen wrench
(#D) to lock them with the legs
(#2).
#B x 8 pcs
#C x 8 pcs
#E x 8 pcs
#F x 4 pcs
I. Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#C) onto the bolt (#E) and then
the flat washer (#B) onto the
SAME bolt (#E), in that order.
II. Align the long side of the L-
brackets (#F) with the pre-drilled
holes on the shelf (#3). Insert 4
bolt assemblies through the long
side of the L-brackets (#F) and
secure those bolts using the Allen
wrench (#D) to lock them with the
shelf (#3).
III. Align the short side of the L-
brackets (#F) assembled on the
shelf (#3) with the pre-drilled
holes on the legs (#2). Insert 4
bolt assemblies through the short
side of the L-brackets (#F) and
secure those bolts using the Allen
wrench (#D) to lock them with the
legs (#2).
Turn right (clockwise) to tighten