Page 7 of 7
Step 7
Step 6
#A-1 x 9 pcs
#A-2 x 9 pcs
#E x 6 pcs
I.
Align the drawer cover (#9-1) with the pre-drilled hole in front of the drawer (#9-1).
II.
Secure 4 bolts (#F) by using the Allen wrench (#G) to lock the drawer (#9-1) with the
drawer cover (#9-1).
III.
Align the knob (#C) with the pre-drilled hole on the drawer cover (#9-1). Insert the
bolt (#B) from the inside of the drawer (#9-1) and secure that bolt using the Allen
wrench (#G) to lock the drawer (#9-1) with the knob (#C).
IV. Repeat the above process to assembly the other drawer (#9-2).
V.
Carefully put the table on its upright position. Insert the completed drawers onto the
table. Make sure the table is rested on a flat surface and it does not feel loose or
wobbly. If it does, double check that the connections are secured and properly
tighten.
#B x 2 pcs
#F x 8 pcs
Insert 6 wood dowels (#E) and 9 cam lock bolts (#A-1) onto the top
panel (#8). Insert a total of 9 cam lock connectors (#A-2) onto the
left/right panels, the rear apron and the center drawer panel (#2, #3,
#4 & #5). See diagram below and refer to “CAM LOCK FASTENER
ASSEMBLY INSTRUCTIONS” for connecting those parts together.
Turn right (clockwise) to tighten
#C
#C
ASSEMBLY IS COMPLETED
Summary of Contents for CM-AC103
Page 2: ...Page 2 of 7 ...
