Top Assembly:
Align the 2 upper side frames (#13) to the pre-
drilled holes on the ends and insert bolts (#A)
into each pre-drilled hole. Secure using the
Allen wrench (#G). Then align 2 upper middle
frames (#14) to the pre-drilled holes along the
center and insert bolts (#A) into each hole.
Secure using the Allen wrench (#G).
Bottom Assembly:
Align the 2 lower side frames (#11) to the pre-
drilled holes on the ends and insert bolts (#A)
into each pre-drilled hole. Secure using the
Allen wrench (#G). Then align 2 lower middle
frames (#12) to the pre-drilled holes along the
center and insert bolts (#A) into each hole.
Secure using the Allen wrench (#G).
I. Align the top part of the front guardrail (#6)
and the rear guardrail (#5) to the top pre-
drilled holes on the upper end rails.
II. Insert a bolt (#C) into each end from within.
Secure using the Allen wrench (#G).
I. Align the front guardrail
(#6) to the side you wish
to install the ladder and
the rear guardrail (#5) to
the corners of the upper
end rails.
II. Align a spacer (#F) to
each end and insert
bolts (#E). Secure using
the Allen wrench (#G).
I. Align the rear
connect bar (#7)
and the front
connect bar (#8)
to the bottom pre-
drilled holes along
the sides of the
lower bed rails.
Make sure they
match the upper
rail placements.
II. Align a spacer (#F)
to each end and insert
bolts (#E). Secure using
the Allen wrench (#G).
Summary of Contents for Clement CM-BK928TF
Page 1: ......
Page 2: ......
Page 3: ...Right Ladder Tube Upper Side Frame Lower Middle Frame Lower Side Frame Upper Middle Frame ...
Page 4: ......
