1. Align the bolt set (#A) to the
two bottom holes along the
upper front and back side rails
(#5,6) and the upper HB/FB (#2)
as shown to the left. Then
secure using the Allen wrench.
2. Insert a long screw bolt (#C)
into the top holes along the
upper HB/FB (#2). Secure
using the Allen wrench (#G).
Align the lower front side rails
(#3,4) to the slots along the
lower HB/FB (#1). Insert a half
nut (#A) into the holes along the
sides of the rails and insert the
bolt into the holes along the legs
of the HB/FB. Once inserted, secure
bolts using the Allen wrench (#G).