Equipment
Operation
2.3 Furnace Operation (Process Screen)
The Process Monitor Screen displays the setpoint temperature, the current recipe, process state and status,
transport speed, and other information such as percentage of power to elements and edge heaters. Alarm and
alert dialog box also is displayed here along with event status.
1)
Select the Process button on the menu bar view the process screen.
Figure 2.3.1 Process Screen
2)
View Temperature Deviation Screen.
When on the Process Screen, the user can activate the
Deviation screen by clicking on the Deviation button. The
screen will show the deviation of measured temperature from
set point for each zone. The vertical bars are green for
process ready conditions by zone, and change color
independently as the deviation in a given zone changes.
The user can drag the Deviation screen to another location on
the Process Screen or close the screen at any time.
3)
Check to assure that there are no active alarms
or alerts.
If appropriate, move cursor to and click on “ACK ALMS” to
clear or silence an alarm/alert in order to proceed with
furnace operation. If alarm/alert does not clear, see Troubleshooting in Section 3.
Figure 2.3.2 Temperature Deviation Screen
10-004 – 676-110000
2-7
Summary of Contents for LA-309
