4 Cross beam installation
Insert the shoulder connector to connect both
sides of the desk frame as shown in picture.
Use 8 x bolts (B) and secure loosely in place.
Do not tighten at this stage.
Part B
Qtyx8
Erection Sequence: 1,2,3
1
1
2
2 2
2
3
3
Note: Disregard any small round hole drilled into Part(s) K.
These are not used during assembly.
Note: Part B bolts are only used to make the frame rigid. They do not screw into the
shoulder connector bars, they only push against them.
Parts used:
