furmates Co-rider K9, User Manual, Page: 4 / 12

STEP 1
STEP 2
UNFOLDING THE CO-RIDER K9
MUD GUARD INSTALLATION
Attach the Mud Guard (F) on to the wheel housing so that it aligns with the square hole (S1)
and the flat side facing inward.
Insert one M4 screw (G) into the hole (G1) and secure it. Repeat this procedure for the second
Mud Guard on the other side.Test that both Mud Guards are securely fastened.
Attaching the Mud Guard Installed Mud Guard
1.1 Press button (1) and lift the rider arm upward
until it is fully extended and engaged.
1.2 Pull the two lower sections apart in opposite
directions until fully opened and you hear
the centre shaft click into the locked position.
1
G
F
F
A
A
G1
S1
S1
1.1
A
1.2