Assembly instructions for 4ft 6in / 5ft or 6ft bed
with an east / west split
1.
2.
3. Repeat as above on the second base.
4. Link both sides
together.
5. Fit both frames into position on base
making sure that the head is at the top.
6. Insert mattress retainers.
7. Retrieve the remote controls from
beneath the bed frame.
8. Attach headboard(s) as per instruction 3
on the previous page.
If you ordered your MiBed to feature legs,
please ensure that the leg spindles are
cross threaded when tightened.
Fitting skittle legs
4
Mattress retaining side clips:
If supplied with your MiBed please insert
your side clips as follows;
1. Insert open end between
slats.
2. Twist and locate lower part
of clip to slats.
3. Slide to end of slats to
tighten and position ready
to take mattress.
4. Insert retainer at foot end
as shown on the previous
page.
Massage Systems:
Bolt-on massage unit:
Fix massage unit onto bed frame as
shown, making sure to position each
unit clear of the bed motor. Please
also refer to the manufacturers instructions.
Infrared Massage Units:
To operate please ensure that the
infrared control box is in view of the
control panel.
Sync Cables:
1. Insert a male cable from each
side of the Y cable in to each motor.
2. Insert the female cable in to the
handset.
(If purchased as an additional product)
Please call to purchase
Turn bed onto castors
and remove outer
packaging.
grip kneck shown below,
o
t
n
i
s
r
o
t
s
a
c
t
r
e
s
n
I
Prior to removing the outter packaging.
