S R M - 8 0 A / E – S I G N A L R O U T E R / M O N I TO R
plug. Never use a three-prong to two-prong
AC plug adapter to plug your SRM-80A into
your wall socket.
ON/OFF: Controls power to unit.
AMP-B/C & SPK-B/C SWITCH: When the B/C
switch is in the AMP-B/C position: The input
selected by the Monitor Select switch is routed
through the Monitor level control and sent to
the “A”, “B” or “C” mon i tor line outputs (as
selected with the “A”, “B” or “C” pushbuttons).
B and C speaker outputs and output signals
are separate for use as in di vid u al outputs with
either powered speak ers or passive speakers
with a power amp. See Figure A.
When the AMP/SPK B/C switch is in the SPK-
B/C position: Only the “A” and “B” monitor
line outputs are used and the “B” amplifi er’s
speak er outputs are connected to the “FROM
AMP (B) OUTPUT” binding posts. The B
and C speaker outputs are combined to the
SPEAK ER B output jacks. This is to be used
with a single power amp and 2 pairs of pas-
sive speakers via the binding posts on rear
panel. Connect the SPEAKER B/POWER
AMP IN jacks to the input of your power amp.
Con nect the output of your power amp to the
FROM AMP OUTPUT Binding posts. Connect
1 pair of passive speakers to the SPEAKER
B binding posts and the other pair of passive
speakers to the SPEAKER C binding posts. To
select the associated amplifi er / speaker press
the “A”, “B,” or “C” speaker select but tons on
the front panel. See Figure B.
ON
OFF
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE C
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE C
REFER SERVICING TO QUALIFIED PERSON
REMOTE
USE MODEL
SRM-RU
ONLY
REFER SERVICING TO QUALIFIED PERSON
MADE IN CHINA
OFF
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE COVER.
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE C
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE C
ONLY
SRM-RU
USE MODEL
REMOTE
120 VAC INPUT 60 HZ
GROUND
5 WATTS
120 VAC INPUT 60 HZ
GROUND
5 WATTS
MADE IN CHINA
AMP-B/C
SPK-B/C
SPEAKER C
FROM AMP(B)
OUTPUT
CAUTION:
CONNECT TO POWERED MONITORS
OR POWER AMPLIFIERS INPUTS
SPEAKER B
L
R
L
R
L
R
C
B
A
L
L
R
R
CAUTION:
SPEAKER C
SPK-B/C
AMP-B/C
ON
L
SPEAKER B
R
L
R
L
OR POWER AMPLIFIERS INPUTS
CONNECT TO POWERED MONITORS
R
FROM AMP(B)
OUTPUT
C
R
L
A
B
R
L
SPK-B/C
AMP-B/C
SPK-B/C
AMP-B/C
LIFT
AVIS:
N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE
AVIS:
AVIS:
LIFT
N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE
AVIS:
N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE
N'OUVREZ PAS-RISQUE DE CHOC ELECTRIQUE
CONNECT
PASSIVE
SPEAKERS TO
SPEAKER C
OUTPUTS
CONNECT
PASSIVE
SPEAKERS TO
SPEAKER B
OUTPUTS
CONNECT
OUTPUT OF
AMPLIFIER TO
THESE INPUTS
BOTH LINE OUTPUTS
B AND C WILL BE
PRESENT AT THE B
1/4" OUTPUTS.
NO SIGNAL WILL
BE PRESENT AT
THE 1/4" LINE
OUTPUT C
AMP-B/C SPK-
B/C SWITCH IS
SET TO SPK-B/C
SPEAKER C
OUTPUT IS
NOT USED
SPEAKER B
OUTPUT IS
NOT USED
INPUT FROM
AMP IS NOT
USED
AMP-B/C SPK-
B/C SWITCH IS
SET TO AMP-B/C
CONNECT LINE OUTPUTS
A, B AND C TO THE INPU
OF POWERED SPEAKERS
OR POWER AMPLIFIERS.
CONNECT LINE OUTPUT
A TO THE INPUTS OF
POWERED SPEAKERS
OR POWER AMPLIFIER.
CO NN ECTIO
II NS FO R 2 P
2 P
2 PIR
II S O F PA
P
P SSIV
II E
SPEAKER WIT
WI
WI H A SING
IN
IN LE PO
P
P W ER AMP
CO NN ECTIO
II NS FO R 3 P
3 P
3 PIR
II S O F PO
P
P W ERED
SPEAKERS O R PA
P
P SSIV
II E SPEAKERS WIT
WI
WI H
SEPARATE PO
P
P W ER AMP S
FIGURE A
FIGURE B
7
