6
circuit breaker button! It is the round black button adjacent to the
incoming AC cord. If the circuit breaker trips immediately, there may
be too great of a current load placed upon it. Simply disconnect one
product at a time until this no longer happens. If the breaker trips
with no components connected, there may be a wiring defect that
requires Furman service.
Indicators
Protection OK Indicator:
Although Furman’s Ground Contamination Free Surge Suppression
rarely requires servicing, nature has a way of occasionally creating
electrical forces that are beyond the capabilities of any transient
voltage surge suppressor device to absorb without some degree
of damage. In the instance that this occurs, the green “Surge
Protection” LED indicator will turn off and a warning buzzer will sound
an audible alarm. If this happens, Furman’s surge suppression circuit
is compromised. The unit must be returned to Furman Sound, or an
authorized Furman Service Center for repair.
Mounting
If the Power Station needs to be mounted to the inside panel of a rack
or hung from a wall, a convenient crossed oval cutout is provided on
the unit’s bottom panel. A standard No. 6 pan head screw can be
used in the same way a picture is hung from a wall. Simply measure
the centers on the bottom of your Power Station. This will be the
distance from the two mounting holes drilled into your wall, rack or
cabinet surface. Once the screw is fastened fl ush with the surface,
back it out approximately 1/4”. The screw head should push through
