P S - P R O E I I / P E I I - P O W E R C O N D I T I O N E R / S E Q U E N C E R
P S - P R O E I I / P E I I - P O W E R C O N D I T I O N E R / S E Q U E N C E R
Furman Sound, Inc.
1997 South McDowell Blvd.
Petaluma, California 94954-6919 USA
Phone: 707-763-1010 Fax: 707-763-1310
Web: www.furmansound.com
E-mail: [email protected]
Furman Sound, Inc.
1997 South McDowell Blvd.
Petaluma, California 94954-6919 USA
Phone: 707-763-1010 Fax: 707-763-1310
Web: www.furmansound.com
E-mail: [email protected]
031605-D
insured. We suggest that you save the original
packaging and use it to ship the product for
servicing. Also, please enclose a note with your
name, address, phone number and a description
of the problem.
NOTE: All equipment being returned for repair
must have a Return Authorization (RA) Number.
To get an RA Number, please call the Furman
Service Department, (707) 763-1010, Ext. 120 or
121, between 8 am and 5 pm U.S. Pacific Time.
Please display your RA Number prominently on
the front of all packages.
PS-PRO E II / PE II SPECIFICATIONS
Current Rating:
16 Amps
Input Voltage:
180 to 280 VAC without damage
Delay Intervals:
Total elapsed ON or OFF delay time adjustable
from 1-60 seconds, with a single trimpot
ON Sequence:
-Delay 1 outlets go on immediately with switch.
-Delays between outlets 1 and 2, and 2 and 3,
adjustable from 1-60 seconds each
OFF Sequence:
-Delay 3 outlets go off immediately with switch.
-Delays between outlets 3 and 2, and 2 and 1,
same as ON delays
Remote Switch:
Screw terminals, 2 for switch, 2 additional for
optional LED (22 ga. minimum)
Spike Protection Modes:
Line to neutral, zero ground leakage
Spike Clamping Voltage:
376 Vpk (266 VAC RMS)
Response Time:
1 nanosecond
Maximum Surge Current:
6,500 amps
Dimensions:
1.75” H x 19” W x 10.5” D.
Weight:
12 lbs.
Construction:
Steel chassis, .125” brushed and black
anodized aluminum front panel; glass epoxy
printed circuit boards
Power Consumption:
11 watts
Safety Agency Listings:
CE
Over Voltage Shutdown:
280V HI, 150V LO
Optional:
220/240V Versions (units with “E” suffix only) are
intended for use in countries with nominal 220 to
240 volt AC mains. Their rear panel outlets use
internationally accepted IEC-320 connectors.
