Furman HDS-6 Owner'S Manual Download Page 4

HDS-6/HR-6 HEADPHONE DISTRIBUTION SYSTEM

LINKING HDS-6 TO HR-6

S

The HDS-6 links to your mixer or patch bay via 

the six TRS 1/4" phone jacks on the right side of 

the HDS-6 rear panel, as shown on the drawing 

below. You’ll have four mono jacks for the signals 

coming from the direct channel out of the busses 

of your mixer and two more jacks for the Left and 

Right stereo inputs from your mixer (or two more 

mono signals).

The left side of the HDS-6 rear panel provides 

two Ethernet-CAT5 cable connectors, labeled 

“Blue” and “Gray,” to link the HDS-6 to the fi rst 

HR-6 mixer in your chain.

The HR-6 mixing station, shown below, links to 

your HDS-6 with the pair of Ethernet-CAT5 cables 

you just connected to your HDS-6. Make sure you 

connect the “Blue” and “Gray” Ethernet outputs of 

the HDS-6 to the “Blue” and “Gray” inputs of the 

fi rst HR-6 mixer in your chain. When daisy-chain-

ing HR-6 mixers, be sure to connect the “Blue” 

and “Gray” outputs of one HR-6 to the “Blue” and 

“Gray” inputs of the next one.

3

Rear Panel "Link" Outputs for 
the fi rst HR-6 in your chain

Rear Panel Balanced Inputs for your Console

Power Switch

Ground Lift Switch

Power Indicator

Level Set Controls

Overload Indicators

Mon/Eff Mix Control

Link Cable Reversed Indicator

HDS-6 CONTROLS

The HDS-6 provides several simple controls and 

indicators that make it quick and easy for you to 

get optimum performance with your headphones. 

First, make sure your console is connected to your 

HDS-6 (either directly or through your patch bay) 

and is providing a signal to your HDS-6. The HDS-

6 front panel controls are shown in the drawing 

above. Just beneath the heading “SUBMIXES” 

you’ll see four identical groups of controls and 

indicators – one group for each of the HDS-6’s four 

mono channels. See the following page for a more 

detailed description of the controls.

L

R

CH 2

CH 4

INPUTS

CH 1

CH 3

CAUTION:

TO PREVENT ELECTRICAL SHOCK

DO NOT REMOVE COVER

REFER SERVICING TO QUALIFIED

PERSONNEL ONLY

N’OUVREZ PAS RISQUE

DE CHOC ELECTRIQUE

LI S T E D

7 Z 3 7

P R O F E S S I O N A L

A U D I O E Q U I P M E N T

AVIS:

GROUND

LIFT

ON

OFF

LINK

TO HR-6 UNITS

GRAY

BLUE

120 VAC INPUT

60 HZ

12 WATTS

MADE IN U.S.A.

HDS-6 Rear Panel

HDS-6 Front Panel

Summary of Contents for HDS-6









Reviews: