Furious FPV PIKO F4 OSD User Manual Download Page 3

 

 

 

Introduction 

Furious FPV PIKO F4 OSD - Seeing Is Believing 

Step into the latest OSD via Furious FPV - the all new PIKO F4 OSD. Feature loaded 

with maximum functionality, this brutal little beast is FPV bliss, ready & waiting to 
push your FPV to the ultimate extreme. 

Integrated with a built in current sensor, the PIKO F4 OSD is the 1st of its kind to 

offer this full size monitoring capability. Yet even with such a minimal footprint, the 
PIKO F4 OSD offers a massive array of functionality, such as (5) UARTS, Inrush Voltage 
Protection, 5V@1.5A integrated BEC, integrated driver for SBUS & Smart Port 
Connection. 

Massively capable, the PIKO F4 OSD is able to completely power the Rx via USB 

port, supporting up to (6) ESC ports for usage, including hexcopters. With flexibility 
as the ultimate key, the PIKO F4 OSD offers it all, with the ability to easily connect to 
a 4 in 1 ESC. 

Don't settle for less and step into the ultimate OSD with the Furious FPV PIKO F4 

OSD - a massive game changer with an ultra-compact layout. 

Features & Specifications 

 

Built-in OSD 

 

Built-in Current sensor (maximum 75A) 

 

Invensense 20602 gyro for high speed 32khz, 
lowest noise floor and highest sensitivity 

 

Can be used hexcopters 

 

Full UART1, UART4, UART6 

 

Camera can only be used with 5V 

 

Supports Betaflight Peripheral configuration 

 

Five UARTs for Simultaneous Connections of USB,  

      S.BUS, S.PORT, TBS Micro Rx or GPS Antenna, Telemetry VTX 

 

Built-In Driver Inverter for S.BUS and Smart PORT Connection 

 

Integrated Soft Mount Silicone Damping for Maximum FC Functionality 

 

Inrush Voltage Protection Input & Output via Transient Voltage Suppressor 

 

High Quality 5V@1.5A BEC w/ 2S - 6S Voltage Input Range 

 

Fully Capable to Power Rx via USB Port 

 

Clean and Easy to connect with 4in1 ESC 

 

Dimensions: 27x27x5.6mm 

 

Weight: 4.7gr 

 

Voltage Range: 2S-6S LiPo 

 

Summary of Contents for PIKO F4 OSD



















Reviews: