2
Step 2: Configure module for Transmitter:
From Home screen on your transmitter, press
Menu
button >
Page
button to go
to
Model Setup
page 2/12.
On
Model Setup
page 2/12, press
ADD
or
Minus
button more times to go to:
-
Internal RF
: at Internal RF we stay
Mode
press
Enter
>press
ADD
or
Minus
change to
OFF
for turn OFF Internal Module
.
After that, we go to
External RF
-
At
External RF,
we stay
Mode
press
Enter
>
ADD
change
OFF
to
PPM
.
-
Turn Off transmitter.
Your transmitter had configuration look like this picture.
Now we will Bind Acrowhoop V2 with Taranis use external module Frsky DJT.
Step 3: Active Bind mode for Acrowhoop V2:
Plug Battery 1 cell for FC Acrowhoop v2.
Hold Bind button while you plug battery, when you plug Battery at the Top Side
you will see BLUE LED turn on.
