1
https://furiousfpv.com
How to do connect FRSKY DJT Module with Acrowhoop v2.
Step1: Choose Mode Module to
D8.
On the DJT module of FrSky Taranis transmitter. Change Mode of Module is
Two
Way Mode
by switchs like as this picture.
SW1: OFF SW2: OFF
Page 1: ...com How to do connect FRSKY DJT Module with Acrowhoop v2 Step1 Choose Mode Module to D8 On the DJT module of FrSky Taranis transmitter Change Mode of Module is Two Way Mode by switchs like as this picture SW1 OFF SW2 OFF ...
Page 2: ... ADD or Minus change to OFF for turn OFF Internal Module After that we go to External RF At External RF we stay Mode press Enter ADD change OFF to PPM Turn Off transmitter Your transmitter had configuration look like this picture Now we will Bind Acrowhoop V2 with Taranis use external module Frsky DJT Step 3 Active Bind mode for Acrowhoop V2 Plug Battery 1 cell for FC Acrowhoop v2 Hold Bind button...
Page 3: ...n on the transmitter while holding the F S button on the DJT module see Mode and Compatibility table above Release the button The RED LED on the DJT module will flash and GREEN LED ON indicating the transmitter is ready to bind to the receiver When BLUE LED on FC turn off successful bind 2 Turn off both the transmitter and the Acrowhoop 4 Turn on the transmitter and plug battery for Acrowhoop The ...
