STEP 3
Attach Panel(H)to Panel(F),
as shown.
STEP 5
Attach Panel(G)to Panel(F),
as shown.
Attach Panel(C)to completed
unit in Step 3 and lock Cam-Lock
Nut(2)using screwdriver.
STEP 4
STEP 2
2.1 Install Short Dowel(4)to Panel(D),(H),(E),(F)&(G).
2.2 Install Cam-Lock Nut(2)on Panel(E)&(F).
2.3 Install Long Dowel(5)to all Panel(G).
Note: Arrow on Cam-Lock Nut(2)should be
pointing outward.
STEP 1
1.1 Install Cam-Lock Screw(1)to pre-drilled holes on Panel(A),(B)&(C)using screwdriver.
1.2 Install Cam-Lock Nut(2),Short Dowel(4)and Nail Leg(3)on Panel(B)&(C).
unfinished
surface
finished
edge
finished
edge
finished edge
unfinished
surface
finished
edge
finished
edge
unfinished
surface
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
6pcs
6pcs
4pcs
A
1pcs
Top Panel
Nail Leg
No
Hardware List
Qty
No
Qty
Parts List
Cam-Lock Screw
Cam-Lock Nut
4
5
6
24pcs
4pcs
16pcs
Power Pin
Short Dowel
Long Dowel
B
C
1pcs
1pcs
Right Side Panel
Left Side Panel
D
E
F
1pcs
1pcs
1pcs
Bottom Panel
Top Shelf Panel
Center Shelf Panel
G
H
3pcs
1pcs
Bottom Bar
I
2pcs
Back Panel
Center Panel
(1)x2pcs
(3)x2pcs
(1)x2pcs
(2)x1pcs
(4)x2pcs
(3)x2pcs
(1)x2pcs
(2)x1pcs
(4)x2pcs
finished
edge
unfinished
surface
unfinished
surface
(4)x4pcs
(4)x4pcs
finished
edge
finished
edge
finished
edge
finished
edge
finished
edge
unfinished
surface
(4)x2pcs
x3pcs
finished
edge
finished
edge
finished
edge
unfinished
surface
(4)x4pcs
(2)x2pcs
(4)x4pcs
(2)x2pcs
(5)x2pcs
unfinished
surface