Copyright © 2017 Funtronix LLC. All rights reserved
5
5.
If the timer appears to operate erratically, it may be due to radio interference from
a nearby signal. Try changing the radio channel of the timer by pressing and
holding the
button for approximately 3 seconds.
6. To change the display brightness, press and hold the
button for
approximately 3 seconds.
7. Set the timer on a sturdy surface, such as the floor or table. You may also
purchase a floor stand from the Funtronixonline.com website to raise the timer
above the ground.
8.
You are now ready to use your timer. Proceed to Section 2 for details regarding
configuration and use of your timer.
