Copyright © 2015 Funtronix LLC. All rights reserved
4
SECTION 1
SCOREBOARD SETUP
1.
Charge the keypad battery as described in
Section 3
.
2.
Install 6 AA-size alkaline batteries in the scoreboard into the battery holder located on
the back-side of the scoreboard. You may also use an AC adapter (sold separately)
to conserve your batteries. Plug the adapter into the AC adapter jack located on the
back of the scoreboard unit.
3. Extend the swivel-out feet located on
the bottom of the scoreboard to stand
the it upright on a table or floor.
4.
Turn the scoreboard on using the power switch located on the back of the scoreboard.
5.
If the scoreboard appears to operate erratically, it may be due to radio interference
from a nearby signal. Try changing the radio channel of the scoreboard by pressing
and holding the
button for approximately 3 seconds.
6.
To change the display brightness, press and hold the
button for approximately
3 seconds.
7.
Set the scoreboard on a sturdy surface, such as the floor or table.
8. You are now ready to use your scoreboard. Proceed to
Section 2
for details
regarding configuration and use of your scoreboard.
