16
SECTION 7: USING THE STOPWATCH FUNCTION
The stopwatch function offers two ways to time an event: individually-run team time and simultaneous timing
with split function. Follow the instructions below to set up and operate the stopwatch.
1.
Select play mode 7 of the scoreboard as described in Section 2.
Stopwatch Mode. The main clock display shows the elapsed
minutes and seconds, and the guest score display shows the
tenths and hundredths of seconds. (SNT-130M shown for reference)
If you are unable to change play modes, hold the
button down for 3 seconds to reset
the current game in progress. Remember; you cannot change play modes if the scoreboard is
in the middle of a game – you first must reset the current game to allow the mode to be
changed.
2.
To time a home team race followed by a guest team race (no split times), simply press the
button to start the clock, followed by the
button to stop the clock. You can then change
possession to the opposite team and repeat the same start and stop function. Toggling between the
home and guest possession will show you the time for each team. Press and hold the
button
for 3 seconds to reset the stopwatch.
3.
To time both teams simultaneously (using the split function), follow these steps:
3.1
Press the
button to start both team’s clocks.
3.2
To stop a team’s clock, simply press their respective possession button (either the
or
button).
3.3
Press the second team’s possession button to stop its team clock.
3.4
Once both team’s clocks have been stopped, toggling between the home and guest possessions
will display each team’s time.
3.5
Press and hold the
button for 3 seconds to reset the stopwatch.
