Funn STRYGE Installation And Use Manual Download Page 2

Page: 2 / 2

WWW.FUNNMTB.COM

STRYGE STEM 2022.09.01 / REV. 0

EVENLY

SPACED

Please check the torque for all the bolts twice a year. Please also inspect the stem and handlebar for damage and visible cracks.

If any damage, please stop using the part. It should be replaced immediately. Failure to do so may result in serious injury.

Warning

6Nm

INSTALLATION AND USE

6Nm

STRYGE STEM

Install the handlebar and place the faceplate over the bar. Thread the bolts in evenly, just enough to hold the bars in the

stem.

Adjust the handlebar to the preferred position; then tighten the top clamp bolts to 6Nm.

It is advised to tighten incrementally in a cross pattern to distribute the pressure equally.

Insert the steerer clamp bolts. Align the stem to the front wheel and then tighten the stem bolts to 6Nm.

Make sure the stem bolts are tightened before riding. Riding with a loose stem can result in serious accidents.

Summary of Contents for STRYGE

Page 1: ...re the external surface of the steerer tube is both clean and dry Slide the stem onto the steerer depending on the rise or drop required 1 2 Fit the top cap and tighten the headset pre load bolt to re...

Page 2: ...USE 6Nm STRYGE STEM Install the handlebar and place the faceplate over the bar Thread the bolts in evenly just enough to hold the bars in the stem 4 Adjust the handlebar to the preferred position the...