ATTACH HORIZONTAL DIP BAR
6
1. Ensure the lower short tees
on the long gym legs are the
same height above the base plates
as the side dip bar assembly.
2. Fully insert the brace bars into the
leg assembly from step 6.
3. Tighten grub screws.
7
Page 11
ASSEMBLY INSTRUCTIONS - DIP BAR STATION ASSEMBLY
ATTACH SIDE DIP BAR ASSEMBLY
1. Fully insert black dip bar tube into leg
assembly ‘A’ and ‘B’ at the same
height as the assembled outer dip bar.
2. Tighten grub screws.
A
B
1x
Dip Horizontal Tube
50Dia x 1085mm - Black
940mm approx.
Long gym leg assembly from step 6.
Side dip bar assembly from step 3.
SAFETY NOTICE
1. Any person handling or using the Funky Monkey Bars® products must follow the instructions as described
in this document. The person in charge of assembling and using the equipment must ensure that the
recommendations for use given in this document are seen by all users.
2. Only use the Funky Monkey Bars® after they have been fully assembled and after checking that the
fittings are tightened properly (
refer to page 5 - Correct Tightening Method
).
3. DO NOT install your Funky Monkey Bars® over concrete, asphalt, packed earth, wood decking or any
other hard surface. A fall onto a hard surface can result in serious injury or death.
4. Inspect all grub screws, bolts and nuts at the beginning of each play session to ensure your Funky Monkey
Bars® are tight and secure.
5. Ensure all tubes are fully inserted into fittings until you hear the magic “CLUNK” sound.
6. Ensure your Funky Monkey Bars® are properly secure at ALL times. Pegs are in place and inserted fully into
the ground.
7. DO NOT exceed the maximum load/weight limit as recommended by Funky Monkey Bars®.
8. Children should be supervised by an adult at all times.
9. Installing a gym/crash mat under the fall zone area of your Funky Monkey Bars® would be recommended
for children learning this new skill. This will reduce the chance of injury and build the child’s confidence
while they build strength and master the skill.
10. Ensure you have thoroughly read your assembly and installation instructions and viewed our on-line
installation videos at
https://www.funkymonkeybars.com/blogs/installation-maintenance-videos
11. DO NOT climb, sit or stand on top of the monkey bar (horizontal ladder) section.
12. DO NOT jump from the top of any section of the monkey bar.
13. DO NOT use your Funky Monkey Bars® when wet as the steel will be slippery.
14. DO NOT attach items to your frame that are not designed specifically to be used with Funky Monkey
Bars®, especially lower quality products that have not been approved by Funky Monkey Bars®.
15. Ensure the height of your Funky Monkey Bars® (horizontal ladder) are set at a level that is age appropriate.
16. DO NOT install your Funky Monkey Bars® over or near objects that could interfere with users in an unsafe
way. Maintain a clear area around your Funky Monkey Bars®.
17. DO NOT use your Funky Monkey Bars® while under the influence of drugs and alcohol.
18. Wear clothing free of drawstrings, hooks, loops or anything that could get caught while using your Funky
Monkey Bars® and result in entanglement and/or strangulation.
