Page 7
Ensure accessories tube is not
over inserted into extra long tees
& is level with through hole.
1x or 2x
Accessories Tube
50Dia x 2950mm
Slide long short tees onto ends of
required accessories tubes as per detail and
fully tighten all grub screws.
NOTE:
Refer to individual components
for maximum load on
accessories bar.
Fully tighten all grub screws.
+ 360
o
4
1x or 2x
Long Short Tee
D-101L
ASSEMBLE ACCESSORIES BAR (1x or 2x)
1x or 2x
Long Short Tee
D-101L
1. Slide the 2 accessories bars onto
the swing legs in the selected
location.(highest vertical position)
(Do not tighten grub screws).
2. Reattach the removed 2x swing
bars, Ensure it is fully inserted &
tighten all grub screws.
3. Raise accessories bars hard up
against the swing bar fittings,
then tighten all grub screws.
NOTE: If you are installing directly
onto the monkey bar ladder - ensure the
accessories bar is at the same height.
5
ATTACH ACCESSORIES BARS & SWING BARS
Tighten swing bar grub screws
then accessories bar grub screws.
2x
Swing Bars
removed in step 2
1x
Accessories Bar
only required if not
attaching to monkey bar
ladder positioned at highest
point
+ 360
o
1x
Accessories
Bar - assembled
in step 3
ASSEMBLY INSTRUCTIONS - ACCESSORIES BAR
