FUNKY MONKEY BARS Floating Accessories Bar Assembly Instructions Manual Download Page 3

Page 2

Assembly requires 2 adults.

Heavy items !

Work on flat level surface.

ASSEMBLY

1.  Keep small children away from the Funky Monkey Bars® when assembling the Floating Accessories Bar.
2.  Do not attempt to use the Funky Monkey Bars® or the Floating Accessories Bar until it is completely    
 

assembled and every fitting is tight and secured.

3.  Installation typically takes 1-2 hours to complete. Two people are recommended for assembly.
4.  Ensure all fittings are tightened to the correct tightening method as described on page 4.
5.  Assembly should be carried out on clean, dry, level surface.

Please refer to the video section on the Funky Monkey Bars® website for more handy tips and assembly 

instructions at 

http://www.funkymonkeybars.com/pages/videos

LOCATION

1.  A safe fall zone around your Funky Monkey Bars® is essential. A minimum distance of 1.5m to 2m (5 ft to  
 

6.5ft) is recommended around the elevated hanging points of your Funky Monkey Bars®.

2.  Place your Funky Monkey Bars® on level ground, away from any structure or obstruction such as a fence,  
 

garage, house, overhanging branches, laundry lines or electrical wires and remove any obstructions  

 

beneath your Funky Monkey Bars®.

3.  Ensure your Funky Monkey Bars® are positioned away from retaining walls, pool fences, structures and  
 

other play equipment. Maintain a clear space around the whole perimeter of your Funky Monkey Bars®.

4.  Place your Funky Monkey Bars® on the most level surface available.

MAINTENANCE

1.  At the beginning of each heavy play session we recommend the following maintenance processes be  

 

performed on your Funky Monkey Bars®:

 

• 

Tighten all bolts, grub screws and applicable hardware (as per page 4)

 

• 

Lubricate all metallic moving parts as per instructions (flying fox, swing hooks etc)

 

• 

Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose,  

 

 

cracked or missing.

 

• 

Check all moving parts including swing seats, shackles, snap hooks, chains and trolleys for wear,  

 

 

rust, or other deterioration. Replace as needed.

2.  Twice a month during play season we would recommend the following maintenance processes be  

 

performed on your Funky Monkey Bars®:

 

• 

Tighten all connections and hardware

 

• 

Check all protective coverings on bolts, pipes, edges and corners. Replace if they are loose,  

 

 

cracked or missing.

3.  Once a month during play season we would recommend the following maintenance processes be   

 

performed on your Funky Monkey Bars®:

 

• 

Lubricate all metallic moving parts as per instructions (flying fox, swing hooks etc). If swings start  

 

 

to squeak then lubricate swing hooks.

 

• 

Check all moving parts including swing seats, ropes, chains and trolleys for wear, rust, or other  

 

 

deterioration. Replace as needed.

 

• 

Owners shall be responsible for maintaining the legibility of any warning labels.

For additional information concerning your Funky Monkey Bars®, please contact our customer service team 

or check our website for any important updates. Phone: 1300 912 198 or www.funkymonkeybars.com

Summary of Contents for Floating Accessories Bar



















Reviews: