Funkwerk elmeg t444, Operating Instructions Manual, Page: 15 / 84

Call pick-up from answering machine
Calls that are signaled at the answering machine (the answering machine has not yet responded) can be taken within a group using the per-
formance feature »Accepting a call«. If the answering machine has already accepted the connection you can also take this call from your
telephone.
b #0 g
Lift up
handset
Take call / conversation
from the answering machine
Conversation
Making internal calls
All phone calls, fax transmissions or data transmissions that take place between internal analog and ISDN terminal devices are internal con-
nections for which no charges are billed.
If a connection is set up between internal terminal devices and the terminal devices connected to the external ISDN point-to-multipoint
connection (to which your PABX system is also connected), this is considered as being an external connection for which charges are billed.
Making internal calls without »Direct exchange line access«
b t l g
Lift up
handset
internal number Subscriber
is called
Conversation
Making internal calls with »Direct exchange line access«
If you are making an internal call, or initiating a function, such as accepting a call, lift the handset and press the asterisk key – you can then di-
al an internal number.
If you hear the busy signal when you lift the handset (external ISDN connection busy) press the asterisk key again and you will hear the
internal dial tone.
b * t l g
Lift up
handset
Dial internal extension number Subscriber
is called
Conversation
Announcement
Would you like to call your co-workers to a meeting, or invite your family out to eat? You could call each separate person to do this, or you
can use the message function. With this function, you need to make only one call to reach all of the telephones that are authorized for messa-
ges, without the called parties having to lift up the handsets of their phones.
At the internal ISDN connection of your PABX only the first two team telephones can be used simultaneously for a message. You can enable
or inhibit the message function for each internal user (see page 11). A notice signal is issued at the beginning of the message.
Refer to the operating instructions for your telephones whether the phones support the message feature.
Making an announcement
b *540 t q g
Lift up
handset
Internal- or
Team-Call number
Ack.
signal
Announcement
Enabling / inhibiting announcements
You can enable or inhibit the sending of messages to your telephone. If you have disabled messages being sent to your phone, the caller that
is attempting to send a message to you will hear the busy signal.
Making internal calls
11