Funkwerk elmeg t444, Operating Instructions Manual, Page: 12 / 84

The following features are available in the system menu:
·
Telephone directory for the PABX
·
Follow me
·
Direct call
·
Switching call modes (day/night)
·
Cost registration
·
LCR
Refer to the operating instructions of the terminal device being used to find out how to reach the PABX system menu.
Telephone directory
Using system telephones, you can access the PABX telephone directory.
To search for an entry in the telephone directory enter the first few letters (maximum 8) for the entry and then confirm your input.
Eight (8) entries from the PABX telephone directory are always shown which you can view one after the other.
Select the desired entry and confirm by clicking »OK«.
You must now begin dialing by lifting the handset.
When using system telephones you can reach the PABX telephone directory by pressing Shift + the telephone direc-
tory softkey (for example »telephone directory«). System telephones without a telephone directory can access the te-
lephone directory of the PABX via this telephone directory softkey.
Follow me
Using system telephones, you can set up call forwarding from another terminal device of your PABX system to your telephone or mobile
unit. This call forwarding is based on the feature Follow me for the PABX.
Enter the number of the subscriber that is to be forwarded to your telephone and the type of call forwarding using the system menu. In addi-
tion, you can also delete an existing call forwarding function. A distinction is made between the following types of call forwarding:
»Activate« / »Always active«
All calls are forwarded to your telephone or mobile unit.
Direct dial-in
If the direct call function has been configured your telephone will dial a number (MSN) that you have input previously. If you do not begin
dialing a number within five seconds after lifting up the handset, dialing is begun automatically.
You can configure the number for a direct call via the system menu. The PABX system recognizes by the length of the number whether you
have entered an internal or external number. You therefore do not need to input a prefix code for external numbers.
You can also deactivate or delete a direct call number that has been previously configured or activated.
Call modes
In the »Day / Night« menu of the system menu you can switch over the call mode for the PABX without using the allocated codes (see page
29).The telephones must be authorized for switchover of the call modes.
PABX system menu
8