Funkwerk elmeg t444, Operating Instructions Manual, Page: 33 / 84

Sending/Receiving of SMS messages is only possible:
·
If you have applied for this feature for your USB port (by calling the SMS center of your service provider and comple-
ting the application procedure).
·
If the number for the SMS center for your service provider is stored in the PABX.
·
When the caller's (sender's) number is also transferred and this number displayed at the receiving party.
·
Essentially, you can authorize all terminal devices for SMS.
·
Within a team call assignment configuration you can only assign one telephone (analog or ISDN) with SMS authori-
zation in order that the SMSs reach that specific phone.
·
You can only assign one outgoing number (MSN) to an SMS-authorized telephone. Assignment is made in PC confi-
guration in the section »Internal subscriber« under the tab »Phone number«. Log-in at the SMS center and receiving
of the SMSs are then made using this number.
·
If you enter an SMS-authorized telephone in the team call allocation (in the section »External numbers«) in several
teams with different MSNs, the SMS will only be received at the telephone with the number entered as the outgoing
number.
Contact your service provider to find out what the costs are for sending/receiving SMS.
Transmission of user-defined characters (UUS1)
You can send text messages from one ISDN terminal device to another ISDN terminal without having to call that particular subscriber. The-
re are no additional charges for transmission of these types of messages.
The information about a new text message is shown in the display of the corresponding terminal device after this information has been
transferred. Depending on the type of ISDN terminal device used, these text messages may be default messages, or freely generated texts.
You can only use this performance feature if it is supported by the ISDN terminal devices. Please refer to the operating instructions for your
ISDN terminal devices for proper use.
You can also utilize the transmission of text messages from and to external telephones if the feature »UUS1 (User to User Signaling1)« has
been activated for your connection. Ask your network service provider for details.
Information from the ISDN network (MWI)
The MWI feature allows your service provider to inform you if new messages for you are actually available. For example, if you have a new
e-mail message in your mailbox or on the server of your Internet provider, MWI will notify you. Terminal devices that support this feature
can display or signal this information. MWI information is transferred transparently by the PABX to the terminal devices.
You must apply for this ISDN connection feature at your service provider. You will then be informed of all available
services there.
Automatic changeover of authorization for external calls
Do you need to revoke or grant authorization privileges of certain subscribers / terminal devices of the PABX for making external calls?
You can specify separately for each telephone / terminal device whether the authorization privileges for making external calls are to be revo-
ked or granted for a certain time defined in the calendar. After the authorization privileges have been changed automatically, the user
concerned will not be able to place any external calls.
No operating actions are required for this function. In PC configuration you can mark (specify) the user for which call authorization is to be
changed. The calendar used to determine when changeover is to take place can be set in PC configuration.
Emergency calls using terminal devices provided for this purpose, or emergency numbers, are exempt from this aut-
horization privilege change.
Features without user action
29