background image

22 

|

 

23

7.2   Symbols

The control unit of the EGO FLASH features an 
OLED display and a total of 6 keys. The illustration 
below gives a quick overview of the keys. The 
functions of the individual keys are explained in 
this section.

7.2.1 Key 

functions

     

 

→    The           key (green) is for accepting calls. Prolonged pressing of the           key will also launch voice

     

 

      control. Possible voice commands can be found in the “Voice control” chapter of these operating

     

 

      instructions. Another function is the selection of menu items. When listening to music, this key controls

         both 

the 

play 

and 

pause 

functions.

     

 

     

Functions in brief:

  Accept call, select menu items, launch voice control, play, pause, end screensaver

 
     

 

→    The           key (red) is used to reject incoming calls and to end completed calls (hang up). During music

     

 

      playback, the song may be stopped with the           key.

     

 

     

Functions in brief:

  Hang up, reject, stop, end screensaver

     

 

→    During music playback, the           key can be used to skip forward to the next title. This key can also be

     

 

      used to navigate the menu and speller.

     

 

     

Functions in brief:

  Skip forward to next title, navigate menu and speller, end screensaver

 
     

 

→    The           key controls the reverse-skip function during playback. This key can also be used to navigate

     

 

      the menu and speller.

     

 

     

Functions in brief:

  Reverse skip, navigate menu and speller, end screensaver

Summary of Contents for EGO FLASH



























































Reviews: