The External Reporting -> E-mail Alert-> E-mail Alert Server menu consists of the fol-
lowing fields:
Fields in the E-mail Alert Server Basic Parameters menu
Field
Description
Alert service
Enable or disable the function.
Sender E-mail Address
Enter the mail address to be entered in the sender field of the E-
mail.
Maximum Messages per
Minute
Limit the number of outgoing mails per minute. Possible values
are
1
to
15
, the default value is
6
.
Fields in the E-mail Alert Server SMTP Settings menu
Field
Description
SMTP Server
Enter the address (IP address or valid DNS name) of the mail
server to be used for sending the mails.
The entry is limited to 40 characters.
SMTP Authentication
Forward the incoming E-mails.
Possible values:
•
None
(default value): The E-mails are not forwarded.
•
ESMTP
: The E-mails are forwarded to the destination over
SMTP.
•
SMTP after POP
: The E-mails are collected by the provider
with POP and are forwarded to the destination over SMTP.
User name
Only if SMTP Authentication =
ESMTP
or
SMTP after POP
.
Enter the name of the user.
Password
Only if SMTP Authentication =
ESMTP
or
SMTP after POP
.
Enter the password of the user.
POP3 Server
Only if SMTP Authentication =
SMTP after POP
.
Enter the address of the server from which the mails are to be
retrieved.
Appropriate POP3 server software must be installed so that the
16 External Reporting
Funkwerk Enterprise Communications GmbH
480
bintec R1xxx/R3xxx/R4xxx
