6.4.1 ADSL Configuration
In this menu, you make the basic settings for your ADSL connection.
R3000 and R3000w are ADSL multiprotocol routers with integrated ADSL(2+) modem and
automatic ISDN backup. The ADSL modem on the R3000 / R3000w is compatible with AN-
NEX A and ANNEX B standards and so can be used universally in several countries. It is
particularly suitable for high-speed Internet access and remote access use in SMEs or re-
mote offices. The device is supplied ex works with 10 IPSec tunnels including hardware ac-
celeration. Up to 100 additional IPSec tunnels can also be enabled if licensed. The integ-
rated second ISDN S0 interface can also be enabled by licence if required.
Fig. 82:
Physical Interfaces
->
ADSL Modem
->
ADSL Configuration
The Physical Interfaces -> ADSL Modem-> ADSL Configuration menu consists of the
following fields:
Fields in the ADSL Configuration ADSL Port Status menu
Field
Description
ADSL chipset
Shows the key of the installed chipset.
Physical connection
Shows the current ADSL operation mode. The value cannot be
changed.
Possible values:
•
Unknown
: The ADSL link is not active.
Funkwerk Enterprise Communications GmbH
6 Physical interfaces
bintec R1xxx/R3xxx/R4xxx
173
