(a) Abbreviation for interface type
(b) Number of the Ethernet port
(c) Number of the interface
Example:
en1-0
(first interface on the first Ethernet port)
The name of the bridge group is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the bridge group
Example:
br0
(first bridge group)
The name of the wireless network is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the wireless module
(c) Number of the interface
Example:
vss1-0
(first wireless network on the first wireless module)
The name of the WDS link or bridge link is made up of the following parts:
(a) Abbreviation for interface type
(b) Number of the wireless module on which the WDS link or bridge link is configured
(c) Number of the WDS link or bridge link
Example:
wds1-0
(first WDS link or bridge link on the first wireless module)
The names of the virtual interfaces connected to an Ethernet port are made up of the fol-
lowing parts:
(a) Abbreviation for interface type
(b) Number of the Ethernet port
(c) Number of the interface connected to the Ethernet port
(d) Number of the virtual interface
Example:
en1-0-1
(first virtual interface based on the first interface on the first Ethernet
port)
5.3.1 Interfaces
You define separately whether each interface is to operate in routing or bridging mode.
If you want to set bridging mode, you can either use existing bridge groups or create a new
5 System management
Funkwerk Enterprise Communications GmbH
138
bintec R1xxx/R3xxx/R4xxx
