-15-
Installation
Audio 2010
6. 6. Installation of the display and actuator
Variant 1
With the aid of an adhesive pad, the display can be attached directly on a flat sur-
face.
In order to structure the installation as inconspicuous as possible, the display has
4 possibilities of routing out the ribbon cable.
Variant 2
The display can also be attached with a ball adapter, which can also be indivi-
dually adjusted after fixing. The ball adapter is attached on a flat surface with the
aid of the adhesive pad.
Surfaces to be bonded must be free from grease and dust. Clean the
planned location with a suitable cleaning agent, such as e.g. spirit.
Employ these agents only if the plastics or painted wood surfaces do
not dissolve and are not self-lubricating. Unsuitable agents are e.g.
petroleum ether, acetone, turpentine, trichlorine ethylene and similar
cleaning agents!
Adhesive pad
Cable routing
Adhesive pad
Cable routing
