Major BOS 4VD/8VD
8.General safety instructons
8. General safety instructions
Please read the manual carefully before installaton and setup of your device.
The relevant regulatons must be complied to when working with 230V line voltage, two-wire-
lines, four-wire-lines and ISDN-lines. It is also very important to comply to the regulatons and
safety instructons of working with radio installatons.
Please compl: to the following safet: ruleso
•
All components may only be mounted and maintained when power is of.
•
The modules may only be actvated if they are built in a housing and are scoop-proof.
•
Devices which are operated with external voltage – especially mains voltage – may only be
opened when they have been disconnected from the voltage source or mains.
•
All connecton cables of the electronic devices must be checked for damage regularly and must
be exchanged if damaged.
•
Absolutely comply to the regular inspectons required by law according to VDE 0701 und 0702
for line-operated devices.
•
Tools must not be used near or directly at concealed or visible power lines and conductor paths
and also not at and in devices using external voltage – especially mains voltage – as long as the
power supply voltage has not been turned of and all capacitors have been discharged.
Electrolytc capacitors can be stll charged for a long tme afer turning of.
•
When using components, modules, devices or circuits and equipment the threshold values of
voltage, current and power consumpton specifed in the technical data must absolutely be
complied to. Exceeding these threshold values (even if only briefy) can lead to signifcant
damage.
•
The devices, components or circuits described in this manual are only adapted for the specifed
usage. If you are not sure about the purpose of the product, please ask your specialized
distributor.
•
The installaton and setup have to be carried out by professional personnel.
9. Returning of old equipment
According to German law concerning electronic devices, old devices cannot be disposed of as regular
waste. Our devices are classifed for commercial use only. According to § 11 of our general terms of
payment and delivery, as of August 2015, the purchasers or users are obliged to return old equipment by us
free of cost. FunkTronic GmbH will dispose of this old equipment at its own expense according to
regulatons.
Please send old equipment for disposal to:
FunkTronic GmbH
Breitwiesenstr. 4
36381 Schlüchtern
GERMANY
>>> Importanto
Freight forward deliveries cannot be accepted by us!
Subject to change, errors excepted!
-16-
MBOSVD_eng (24.09.21)
